Three-dimensional probabilistic simulation of solidification grain structures: Application to superalloy precision castings

Journal Article · Mon Feb 01 04:00:00 EST 1993 · Metallurgical Transactions, A (Physical Metallurgy and Materials Science); (United States)

DOI:https://doi.org/10.1007/BF02657334· OSTI ID:6311574

Gandin, Ch -A; Rappaz, M ^[1]; Tintillier, R ^[2]

---

1. Ecole Polytechnique Federale de Lausanne (Switzerland)
2. Societe Nationale d'Etude et de Construction de Moteurs d'Aviation, Gennevilliers (France)

A two-dimensional (2-D) probabilistic model, previously developed for the prediction of microstructure formation in solidification processes, is applied to thin section superalloy precision castings. Based upon an assumption of uniform temperature across the section of the plate, the model takes into account the heterogeneous nucleation which might occur at the mold wall and in the bulk of the liquid. The location and crystallographic orientation of newly nucleated grains are chosen randomly among a large number of sites and equiprobable orientation classes, respectively. The growth of the dendritic grains is modeled by using a cellular automaton technique and by considering the growth kinetics of the dendrite tips. The computed 2-D grain structures are compared with micrographic cross sections of specimens of various thicknesses. It is shown that the 2-D approach is able to predict the transition from columnar to equiaxed grains. However, in a transverse section, the grain morphology within the columnar zone differs from that of the experimental micrographs. For this reason, a three-dimensional (3-D) extension of this model is proposed, in which the modeling of the grain growth is simplified. It assumes that each dendritic grain is an octahedron whose half-diagonals, corresponding to the (100) crystallographic orientations of the grain, are simply given by the integral, from the time of nucleation to that of observation, of the velocity of the dendrite tips. All the liquid cells falling within a given octahedron solidify with the same crystallographic orientation of the parent nucleus. It is shown that the grain structures computed with this 3-D model are much closer to the experimental micrographic cross sections.

• OSTI ID: 6311574
• Journal Information: Metallurgical Transactions, A (Physical Metallurgy and Materials Science); (United States), Journal Name: Metallurgical Transactions, A (Physical Metallurgy and Materials Science); (United States) Vol. 24:2; ISSN 0360-2133; ISSN MTTABN
• Country of Publication: United States
• Language: English

Related Subjects

36 MATERIALS SCIENCE
360102* -- Metals & Alloys-- Structure & Phase Studies
ALLOYS
CASTING
CRYSTAL GROWTH
FABRICATION
HEAT RESISTANT MATERIALS
HEAT RESISTING ALLOYS
MATERIALS
MATHEMATICAL MODELS
MICROSTRUCTURE
NUCLEATION
ORIENTATION
PHASE TRANSFORMATIONS
SOLIDIFICATION
THREE-DIMENSIONAL CALCULATIONS
TWO-DIMENSIONAL CALCULATIONS