Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Catalytic fluidized-bed combustion. Enhancement of sulfation of calcium oxide by iron oxide

Journal Article · · Ind. Eng. Chem. Process Des. Dev.; (United States)
DOI:https://doi.org/10.1021/i200020a019· OSTI ID:6293674
A small amount of iron oxide coated on the surface of dolomite particles substantially increases both the reaction rate and the ultimate capacity for SO/sub 2/ sorption. Although the iron oxide coating was found to catalyze the sulphation of Tymochtee dolomite, it has an inhibiting effect on Greer limestone. The interplay of two opposing effects, increase in the chemical rate and a decrease in pore diffusion rate due to pore plugging, was shown experimentally with pellets of Greer limestone. For Tymochtee dolomite with 1.08% (by weight based on CaO) Fe/sub 2/O/sub 3/ coated on uncalcined stone, it has been shown, through a model, that for 90% sulphur retention a 40% reduction of the sorbent requirement can be achieved over the uncatalyzed case. Fluidization tests at 900/sup 0/C showed that no additional attrition of the sorbent particles was caused by the coated iron oxide.
OSTI ID:
6293674
Journal Information:
Ind. Eng. Chem. Process Des. Dev.; (United States), Journal Name: Ind. Eng. Chem. Process Des. Dev.; (United States) Vol. 22:1; ISSN IEPDA
Country of Publication:
United States
Language:
English