Two-fluid model for two-phase flow
Conference
·
OSTI ID:6291573
The two-fluid model formulation is discussed in detail. The emphasis of the paper is on the three-dimensional formulation and the closure issues. The origin of the interfacial and turbulent transfer terms in the averaged formulation is explained and their original mathematical forms are examined. The interfacial transfer of mass, momentum, and energy is proportional to the interfacial area and driving force. This is not a postulate but a result of the careful examination of the mathematical form of the exact interfacial terms. These two effects are considered separately. Since all the interfacial transfer terms involve the interfacial area concentration, the accurate modeling of the local interfacial area concentration is the first step to be taken for a development of a reliable two-fluid model closure relations. The interfacial momentum interaction has been studied in terms of the standard-drag, lift, virtual mass, and Basset forces. Available analytical and semi-empirical correlations and closure relations are reviewed and existing shortcomings are pointed out. The other major area of importance is the modeling of turbulent transfer in two-phase flow. The two-phase flow turbulence problem is coupled with the phase separation problem even in a steady-state fully developed flow. Thus the two-phase turbulence cannot be understood without understanding the interfacial drag and lift forces accurately. There are some indications that the mixing length type model may not be sufficient to describe the three-dimensional turbulent and flow structures. Although it is a very difficult challenge, the two-phase flow turbulence should be investigated both experimentally and analytically with long time-scale research. 87 refs.
- Research Organization:
- Argonne National Lab., IL (USA)
- DOE Contract Number:
- W-31109-ENG-38
- OSTI ID:
- 6291573
- Report Number(s):
- CONF-870320-3; ON: DE87011498
- Country of Publication:
- United States
- Language:
- English
Similar Records
Interfacial area and interfacial transfer in two-phase systems. DOE final report
On the lift force modeling for single bubble in water
An algebraic stress/flux model for two-phase turbulent flow
Technical Report
·
Mon Jul 01 00:00:00 EDT 2002
·
OSTI ID:809191
On the lift force modeling for single bubble in water
Conference
·
Fri Jul 01 00:00:00 EDT 2016
·
OSTI ID:22977519
An algebraic stress/flux model for two-phase turbulent flow
Conference
·
Thu Nov 30 23:00:00 EST 1995
·
OSTI ID:350936