Three dimensional numerical simulation of shell-and-tube heat exchangers. Part 1: Foundation and fluid mechanics

Journal Article · Mon Jun 01 04:00:00 EDT 1998 · Numerical Heat Transfer. Part A, Applications

DOI:https://doi.org/10.1080/10407789808913967· OSTI ID:624113

Prithiviraj, M; Andrews, M J ^[1]

---

1. Texas A and M Univ., College Station, TX (United States). Dept. of Mechanical Engineering

A three-dimensional, colocated, fully implicit, control volume based calculation procedure, HEATX, has been used to simulate fluid flow and heat transfer in shell-and-tube heat exchangers. The three-dimensional numerical model uses the distributed resistance method along with volumetric porosities and surface permeabilities to model the tubes in the heat exchanger. Turbulence effects are modeled using a modified {kappa}-{var_epsilon} model with additional source terms for turbulence generation and dissipation by tubes. Shell and baffle walls are modeled using the wall function approach. Tubes and baffles are modeled using volumetric porosities and surface permeabilities. Baffle-shell and baffle-tube leakages are modeled using a Bernoulli type formulation. Specialized geometry generators compute baffle, nozzle, and tube region porosities and permeabilities. This article presents the foundation and fluid mechanics of the problem. A subsequent article will discuss modeling of shell-side and tube-side heat transfer. The three-dimensional numerical model is validated by comparison of computed pressure drops with the experiments conducted at Argonne National Labs in E shell type heat exchangers. The effect of baffle cut and baffle spacing on the pressure drop is studied. Good agreement is obtained between the computed results and the experiments.

• Sponsoring Organization: USDOE
• OSTI ID: 624113
• Journal Information: Numerical Heat Transfer. Part A, Applications, Journal Name: Numerical Heat Transfer. Part A, Applications Journal Issue: 8 Vol. 33; ISSN NHAAES; ISSN 1040-7782
• Country of Publication: United States
• Language: English

Related Subjects

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION
42 ENGINEERING
COMPUTERIZED SIMULATION
FLOW MODELS
FLUID FLOW
HEAT EXCHANGERS
HEAT TRANSFER
INDUSTRIAL PLANTS
THREE-DIMENSIONAL CALCULATIONS