skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Composite ceramic superconducting wires for electric-motor applications. Annual report No. 2, 1 July 1989-30 June 1990

Technical Report ·
OSTI ID:6219899

Several types of HTSC wire have been produced and two types of HTSC motors are being built. Hundreds of meters of Ag- clad wire were fabricated from YBawCu3O7x (Y-123) and Bi2Ca2Sr2Cu3O10 (BiSCCO). The DC homopolar motor coils are not yet completed, but multiple turns of wire have been wound on the coil bobbins to characterize the superconducting properties of coiled wire. Multifilamentary conductors were fabricated as cables and coils. The sintered polycrystalline wire has self-field critical current densities (Jc) as high as 2800 A/sq cm, but the Jc falls rapidly with magnetic field. To improve Jc, sintered YBCO wire is melt textured with a continuous process which has produced textures wire up to 0.5 meters long with 77K transport Jc above 11, 770 A/sq cm2 in self field and 2100 A/sq cm2 at 1 telsa. The Emerson Electric DC homopolar HTSC motor has been fabricated and run with conventional copper coils. A novel class of potential very powerful superconducting motors have been designed to use trapped flux in melt textures Y-123 as magnet replicas in an new type of permanent magnet motor. The stator element and part of the rotor of the first prototype machine exist, and the HTSC magnet replica segments are being fabricated.

Research Organization:
Ceramics Process Systems Corp., Milford, MA (USA)
OSTI ID:
6219899
Report Number(s):
AD-A-225859/8/XAB; CPS-90-020; CNN: N00014-88-C-0512
Country of Publication:
United States
Language:
English