skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Microalgae harvesting and processing: a literature review

Technical Report ·
DOI:https://doi.org/10.2172/6204677· OSTI ID:6204677

The objective of this report is to present a discussion of the literature review performed on methods of harvesting microalgae. There is no single best method of harvesting microalgae. The choice of preferable harvesting technology depends on algae species, growth medium, algae production, end product, and production cost benefit. Algae size is an important factor since low-cost filtration procedures are presently applicable only for harvesting fairly large microalgae. Small microalgae should be flocculated into larger bodies that can be harvested by one of the methods mentioned above. However, the cells' mobility affects the flocculation process, and addition of nonresidual oxidants to stop the mobility should be considered to aid flocculation. The decision between sedimentation or flotation methods depends on the density difference between the algae cell and the growth medium. For oil-laden algae with low cell density, flotation technologies should be considered. Moreover, oxygen release from algae cells and oxygen supersaturation conditions in growth medium support the use of flotation methods. If high-quality algae are to be produced for human consumption, continuous harvesting by solid ejecting or nozzle-type disc centrifuges is recommended. These centrifuges can easily be cleaned and sterilized. They are suitable for all types of microalgae, but their high operating costs should be compared with the benefits from their use. Another basic criterion for selecting the suitable harvesting procedure is the final algae paste concentration required for the next process. Solids requirements up to 30% can be attained by established dewatering processes. For more concentrated solids, drying methods are required. The various systems for algae drying differ both in the extent of capital investment and the energy requirements. Selection of the drying method depends on the scale of operation and the use for which the dried product is intended.

Research Organization:
Technion Research and Development Foundation Ltd., Haifa (Israel)
DOE Contract Number:
AC02-83CH10093
OSTI ID:
6204677
Report Number(s):
SERI/STR-231-2396; ON: TI84013036
Country of Publication:
United States
Language:
English