Waste-minimization assessment for a manufacturer of printed labels. Environmental Research Brief
The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small- and medium-size manufacturers who want to minimize their generation of hazardous waste but who lack the expertise to do so. Waste Minimization Assessment Centers (WMACs) were established at selected universities and procedures were adapted from the EPA Waste Minimization Opportunity Assessment Manual (EPA/625/7-88/003, July 1988). The WMAC team at the University of Tennessee performed an assessment at a plant producing printed labels--approximately 14 billion labels/yr. Steel printing cylinders are nickel and copper plated, etched with the label patterns to be printed, chromium plated, and then used with ink applied to print the labels. About 75 percent of the cylinders are chemically etched, and the remainder are mechanically etched. Solvents used with ink concentrate and for cleaning press parts are recovered and sold to reclaimers. Spent reagents, filters, cleaning rags, and sludge are shipped offsite for disposal. Process wastewater and rinse water are treated by ion exchange and distillation. The team's report, detailing findings and recommendations, indicated that most waste other than water and paper consists of spent solvents, and that the greatest savings could be obtained by using recovered solvent instead of virgin solvents for cleaning at press side.
- Research Organization:
- University City Science Center, Philadelphia, PA (United States)
- OSTI ID:
- 6172392
- Report Number(s):
- PB-92-104371/XAB; CNN: EPA-R814903
- Country of Publication:
- United States
- Language:
- English
Similar Records
Waste-minimization assessment for a manufacturer of prototype printed-circuit boards. Environmental Research Brief
Waste-minimization assessment for a manufacturer of printed plastic bags. Research brief
Related Subjects
320305* -- Energy Conservation
Consumption
& Utilization-- Industrial & Agricultural Processes-- Industrial Waste Management
CLEANING
CONTROL
DEPOSITION
HAZARDOUS MATERIALS
HYDROGEN COMPOUNDS
INDUSTRIAL WASTES
ION EXCHANGE
LIQUID WASTES
MANAGEMENT
MATERIALS
MATERIALS RECOVERY
NATIONAL ORGANIZATIONS
OXYGEN COMPOUNDS
PLATING
POLLUTION CONTROL
PROCESSING
RECOMMENDATIONS
RECOVERY
RECYCLING
SOLVENTS
SURFACE COATING
US EPA
US ORGANIZATIONS
WASTE MANAGEMENT
WASTE PROCESSING
WASTE WATER
WASTES
WATER
WATER POLLUTION CONTROL