Skip to main content
OSTI.GOVU.S. Department of Energy Office of Scientific and Technical Information
U.S. Department of Energy
Office of Scientific and Technical Information
 

Operation of repetitively pulsed 300 kV, 20 kA electron beam diode

Conference ·
OSTI ID:6164300
Repetitively pulsed diodes will be required for most of the proposed inertially confined fusion systems, yet little information is available on the operation of vacuum beam diodes under repetitive conditions. Most data are relevant to laser exciter/sustainer diodes operating at low current density (< 1 A/cm/sup 2/) for long pulses. As such they are of marginal value for estimating the properties of repetitive high current density diodes such as will be required for particle beam and some gas laser fusion drivers.
Research Organization:
Sandia Labs., Albuquerque, NM (USA)
DOE Contract Number:
EY-76-C-04-0789
OSTI ID:
6164300
Report Number(s):
SAND-79-0596C; CONF-790327-73
Country of Publication:
United States
Language:
English

Similar Records

Repetitively pulsed electron beam diode lifetime and stability
Conference · Sun Dec 31 23:00:00 EST 1978 · OSTI ID:6143967
Operation of a 300 kV, 100 Hz, 30 kW average power pulser
Conference · Sat Dec 31 23:00:00 EST 1977 · OSTI ID:6917024
Pulsed power considerations for electron beam pumped krypton fluoride lasers for inertial confinement fusion applications
Conference · Mon Dec 31 23:00:00 EST 1990 · OSTI ID:6214781

Related Subjects

43 PARTICLE ACCELERATORS
430303* -- Particle Accelerators-- Experimental Facilities &amp; Equipment
ACCELERATORS
BEAM CURRENTS
BEAMS
CURRENTS
DIODE TUBES
ELECTRON BEAMS
ELECTRON TUBES
ENERGY RANGE
KEV RANGE
KEV RANGE 100-1000
KILO AMP BEAM CURRENTS
LEPTON BEAMS
LINEAR ACCELERATORS
PARTICLE BEAMS
SERVICE LIFE