Cathodic cleaning and heat input in variable polarity plasma arc welding of aluminum
Journal Article
·
· Welding Journal
OSTI ID:616167
- Sandia National Labs., Albuquerque, NM (United States)
For variable polarity plasma arc welding (VPPAW) of 1,100 Al, it was found that the net heat input to the aluminum workpiece did not decrease as independent changes in polarity balance enabled the tungsten electrode to become the predominant anode in the alternating current arc. For the thin sheet edge welds made in this study, the independent parameters used to vary the arc current polarity balance were very effective in delivering a wide range of actual arc power polarity balance. The ratio of electrode positive polarity arc energy to the total arc energy ranged from as little as 0.03 to as high as 0.99. Despite this pronounced difference in arc polarity, no significant variation in the average arc efficiency (net heat input/arc energy) of 0.51 was found. Substantial heating of the workpiece during electrode positive polarity was attributed to field type emission of electrons from the low boiling point aluminum cathode. Unlike thermionic emission at the tungsten, field emission electrons do not cool the cathode. While the actual arc efficiency were relatively constant, there were significant differences in the measured heat input, the weld size, and the effectiveness of the cathodic cleaning.
- Research Organization:
- Sandia National Laboratory
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 616167
- Journal Information:
- Welding Journal, Journal Name: Welding Journal Journal Issue: 2 Vol. 77; ISSN 0043-2296; ISSN WEJUA3
- Country of Publication:
- United States
- Language:
- English
Similar Records
Heat and mass transfer in the gas tungsten and gas metal arc welding processes
On the calculation of the free surface temperature of gas-tungsten-arc weld pools from first principles; Part 1. Modeling the welding arc
Welding arc initiator
Conference
·
Wed Aug 01 00:00:00 EDT 1990
·
OSTI ID:6019827
On the calculation of the free surface temperature of gas-tungsten-arc weld pools from first principles; Part 1. Modeling the welding arc
Journal Article
·
Mon Jun 01 00:00:00 EDT 1992
· Metallurgical Transactions, B (Process Metallurgy); (United States)
·
OSTI ID:7275689
Welding arc initiator
Patent
·
Sat Dec 31 23:00:00 EST 1988
·
OSTI ID:866957