Standard setting processes and regulations for environmental contaminants in drinking water: State versus federal needs and viewpoints
- Interagency Center on Health and Environmental Quality, Michigan Department of Public Health, Lansing (United States)
The primary objective of a standard setting process is to arrive at a drinking water concentration at which exposure to a contaminant would result in no known or potential adverse health effect on human health. The drinking water standards also serve as guidelines to prevent pollution of water sources and may be applicable in some cases as regulatory remediation levels. The risk assessment methods along with various decision making parameters are used to establish drinking water standards. For carcinogens classified in Groups A and B by the United States Environmental Protection Agency (USEPA) the standards are set by using nonthreshold cancer risk models. The linearized multistage model is commonly used for computation of potency factors for carcinogenic contaminants. The acceptable excess risk level may vary from 10(-6) to 10(-4). For noncarcinogens, a threshold model approach based on application of an uncertainty factor is used to arrive at a reference dose (RfD). The RfD approach may also be used for carcinogens classified in Group C by the USEPA. The RfD approach with an additional uncertainty factory of 10 for carcinogenicity has been applied in the formulation of risk assessment for Group C carcinogens. The assumptions commonly used in arriving at drinking water standards are human life expectancy, 70 years; average human body weight, 70 kg; human daily drinking water consumption, 2 liters; and contribution of exposure to the contaminant from drinking water (expressed as a part of the total environmental exposure), 20%. Currently, there are over 80 USEPA existing or proposed primary standards for organic and inorganic contaminants in drinking water. Some of the state versus federal needs and viewpoints are discussed.
- OSTI ID:
- 6146660
- Journal Information:
- Regulatory Toxicology and Pharmacology; (United States), Vol. 13:3; ISSN 0273-2300
- Country of Publication:
- United States
- Language:
- English
Similar Records
Health advisory for 2,4- and 2,6-dinitrotoluene (DNT). Final report
Formaldehyde in drinking water: Comparative hazard evaluation and an approach to regulation
Related Subjects
POLICY AND ECONOMY
DRINKING WATER
CONTAMINATION
WATER QUALITY
STANDARDS
CARCINOGENS
DECISION MAKING
HEALTH HAZARDS
MATHEMATICAL MODELS
RISK ASSESSMENT
ENVIRONMENTAL QUALITY
HAZARDS
HYDROGEN COMPOUNDS
OXYGEN COMPOUNDS
WATER
290300* - Energy Planning & Policy- Environment
Health
& Safety