Pilot line report: development of a high efficiency thin silicon solar cell

Technical Report · Wed Nov 01 04:00:00 EST 1978

OSTI ID:6084775

Experimental technology advances were implemented to increase the conversion efficiency of ultrathin 2cm x 2cm cells, to demonstrate a capability for fabricating such cells at a rate of 10,000 per month, and to fabricate 200 large-area ultrathin cells to determine their feasibility of manufacture. A production rate of 10,000 50 micron m cells per month with lot average AM0 efficiencies of 11.5% was demonstrated, with peak efficiencies of 13.5% obtained. Losses in most stages of the processing were minimized, the remaining exceptions being in the photolithography and metallization steps for front contact generation and breakage handling. The 5cm x 5cm cells were fabricated with a peak yield in excess of 40% for over 10% AM0 efficiency. Greater fabrication volume is needed to fully evaluate the expected yield and efficiency levels for large cells.

• Research Organization: Solarex Corp., Rockville, MD (USA)
• OSTI ID: 6084775
• Report Number(s): N-79-14548
• Country of Publication: United States
• Language: English

Related Subjects

14 SOLAR ENERGY
140501* -- Solar Energy Conversion-- Photovoltaic Conversion
DESIGN
DIRECT ENERGY CONVERTERS
EFFICIENCY
ELECTRIC CONTACTS
ELECTRICAL EQUIPMENT
EQUIPMENT
FABRICATION
MANUFACTURING
PHOTOELECTRIC CELLS
PHOTOVOLTAIC CELLS
PRODUCTION
SILICON SOLAR CELLS
SOLAR CELLS