Mixed-convection flow and heat transfer in the entry region of a horizontal rectangular duct
- Purdue Univ., West Lafayette, IN (United States)
Entry-region hydrodynamic and thermal conditions have been experimentally determined for laminar mixed-convection water flow through a horizontal rectangular duct with uniform bottom heating. Direct heating of 0.05 mm stainless steel foil was used to minimize wall conduction, and the foil was instrumented to yield spanwise and longitudinal distributions of the Nusselt number. Flow visualization revealed the existence of four regimes corresponding to laminar forced convection, laminar mixed convection, transitional mixed convection, and turbulent free convection. The laminar mixed-convection regime was dominated by ascending thermals which developed into mushroom-shaped longitudinal vortices. Hydrodynamic instability resulted in breakdown of the vortices and subsequent transition to turbulent flow. The longitudinal distribution of the Nusselt number was characterized by a minimum, which followed the onset of mixed convection, and subsequent oscillations due to development of the buoyancy-driven secondary flow.
- OSTI ID:
- 6068580
- Journal Information:
- Journal of Heat Transfer (Transactions of the ASME (American Society of Mechanical Engineers), Series C); (United States), Journal Name: Journal of Heat Transfer (Transactions of the ASME (American Society of Mechanical Engineers), Series C); (United States) Vol. 109:2; ISSN 0022-1481; ISSN JHTRA
- Country of Publication:
- United States
- Language:
- English
Similar Records
Numerical simulation of three-dimensional mixed convection heat transfer from an array of discrete heat sources in a horizontal rectangular duct
Measurements in the transition vortex flow regime of mixed convection above a horizontal heated plate