Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Active dc filter for HVDC system--A test installation in the Konti-Skan DC link at Lindome converter station

Journal Article · · IEEE Transactions on Power Delivery (Institute of Electrical and Electronics Engineers); (United States)
DOI:https://doi.org/10.1109/61.252686· OSTI ID:6046235
;  [1];  [2];  [3];  [4]
  1. ABB Power Systems, Ludvika (Sweden). HVDC Division
  2. ABB Corporate Research, Lund (Sweden). Dept. of Man-Machine Communication
  3. Svenska Kraftnaet, Vaellingby (Sweden)
  4. Vattenfall AB, Trollhaettan (Sweden). Region Vaestsverige

The purpose of introducing active dc filters is to meet the more and more stringent requirement from power utilities on limiting telephone interference caused by harmonic currents from HVdc transmission lines, without unnecessarily increasing the cost of HVdc stations. An active dc filter installed in the Konti-Skan HVdc link is described. The active dc filter is connected at the bottom of an existing passive dc filter at the Lindome station. The active dc filter includes optic harmonic current measuring unit, control system, protection and supervision system, PWM power amplifier, high-frequency transformer, surge arrester, and coupling apparatuses. The active dc filter has small physical size and occupies small ground area. The performance of the active dc filter for eliminating the disturbing harmonics is excellent. To achieve comparable results by passive filters would require something like ten times more high voltage equipment.

OSTI ID:
6046235
Journal Information:
IEEE Transactions on Power Delivery (Institute of Electrical and Electronics Engineers); (United States), Journal Name: IEEE Transactions on Power Delivery (Institute of Electrical and Electronics Engineers); (United States) Vol. 8:3; ISSN 0885-8977; ISSN ITPDE5
Country of Publication:
United States
Language:
English