Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Microwave superconducting filters

Conference · · IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States)
OSTI ID:6045920
; ; ; ; ;  [1]; ; ; ;  [2]
  1. Westinghouse Electric Corp., Pittsburgh, PA (United States). Science and Technology Center
  2. Westinghouse Defense and Electronic Systems Center, Baltimore, MD (United States)

This paper reports on high-temperature superconducting (HTS) planar strip filters used in applications where small size and low loss are desirable, such as radar and communications. A major factor for these devices is packaging, since not only thermal considerations are important but also those having to do with HTS material integrity. Four-pole, parallel-coupled microstrip line filters were fabricated using epitaxial YBa{sub 2}Cu{sub 3}O{sub 7} (YBCO) films deposited by off-axis sputtering on LaAlO{sub 3} substrates. Filters were made with and without superconducting ground planes. Because it is not possible as yet to grow in-situ epitaxial films on both sides of a substrate, two separate substrates were used, one for the filter and one for the ground plane. The devices were packaged so that the microstrip-to-ground plane distance was the thickness of one of the substrates (0.43 mm). Passband characteristics and input power and temperature dependence were measured, as well as thermal cycling stability.

OSTI ID:
6045920
Report Number(s):
CONF-900944--
Journal Information:
IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States), Journal Name: IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States) Vol. 27:2; ISSN IEMGA; ISSN 0018-9464
Country of Publication:
United States
Language:
English