Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Josephson junction and dc SQUID made from superconducting Y-Ba-Cu-O thick film

Conference · · IEEE Trans. Magn.; (United States)
OSTI ID:6043781

YBa/sub 2/Cu/sub 3/O/sub 7-x/ thick films were fabricated by the method of screen printing. A zero resistance state was achieved at 90K. The highest critical current density was about 150 A/cm/sup 2/ at 77K. Bridge type Josephson junction and dc SQUID were fabricated from thick films and operated at 77K. The induced steps produced by the ac Josephson effect were observed on the I-V curve when microwave radiation is applied to the junction. The clear periodic patterns of dc SQUID is observable at 77K. Environmental protection and the stability of thick films and devices were discussed.

Research Organization:
General Research Institute of Non-Ferrous Metals, 2, Xin-Jie-Kou-Wai Street, Beijing (CN)
OSTI ID:
6043781
Report Number(s):
CONF-880812-
Journal Information:
IEEE Trans. Magn.; (United States), Journal Name: IEEE Trans. Magn.; (United States) Vol. 25:2; ISSN IEMGA
Country of Publication:
United States
Language:
English

Similar Records

Grain boundary Josephson devices by YBaCuO films and 77K operations
Conference · Tue Feb 28 23:00:00 EST 1989 · IEEE Trans. Magn.; (United States) · OSTI ID:6044356

Practical high T sub c Josephson junctions and dc SQUIDs operating above 85 K
Journal Article · Mon Jun 03 00:00:00 EDT 1991 · Applied Physics Letters; (USA) · OSTI ID:5806041

High-performance DC SQUIDs with submicrometer niobium Josephson junctions
Journal Article · Mon Oct 31 23:00:00 EST 1983 · J. Low Temp. Phys.; (United States) · OSTI ID:5151702