Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Clean coal technology III (CCT III): 10 MW demonstration of gas suspension absorption

Technical Report ·
DOI:https://doi.org/10.2172/6011467· OSTI ID:6011467
The Gas Suspension Absorber system brings coal combustion gases into contact with a suspended mixture of solids, including sulfur- absorbing lime. After the lime absorbs the sulfur pollutants, the solids are separated from the gases in a cyclone device and recirculated back into the system where they capture additional sulfur pollutant. The cleaned flue gases are sent through a dust collector before being released into the atmosphere. The key to the system's superior economic performance with high sulfur coals is the recirculation of solids. Typically, a solid particle will pass through the system about one hundred times before leaving the system. Another advantage of the GSA system is that a single spray nozzle is used to inject fresh lime slurry. The GSA system is expected to be the answer to the need of the US industry for an effective, economic and space efficient solution to the SO{sub 2} pollution problem.
Research Organization:
AIRPOL, Inc., Teterboro, NJ (United States)
Sponsoring Organization:
DOE; USDOE, Washington, DC (United States)
DOE Contract Number:
FC22-91PC90542
OSTI ID:
6011467
Report Number(s):
DOE/PC/90542-T2; ON: DE92007933
Country of Publication:
United States
Language:
English