Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

A unique cabling machine designed to produce rutherford-type superconducting cable for the SSC project

Conference · · IEEE Trans. Magn.; (United States)
OSTI ID:5969445
Up to 25,000 Km of keystoned flat cable must be produced for the SSC project. Starting from a specification developed by Lawrence Berkeley Laboratory (LBL), a special cabling machine has been designed by Dour Metal. It has been designed to be able to run at a speed corresponding to a maximum production rate of 10 m/min. This cabling machine is the key part of the production line which consists of a precision Turkshead equipped with a variable power drive, a caterpillar, a dimensional control bench, a data acquisition system, and a take-up unit. The main features of the cabling unit to be described are a design with nearly equal path length between spool and assembling point for all the wires, and the possibility to run the machine with several over- or under-twisting ratios between cable and wires. These requirements led Dour Metal to the choice of an unconventional mechanical concept for a cabling machine.
Research Organization:
9901800; 9513034
OSTI ID:
5969445
Report Number(s):
CONF-880812-
Conference Information:
Journal Name: IEEE Trans. Magn.; (United States) Journal Volume: 25:2
Country of Publication:
United States
Language:
English