Electrical-ignition energies and thermal autoignition temperatures for evaluating explosion hazards of dusts. Report of Investigations/1985
The Bureau of Mines measured the energy requirements for the spark ignition in air of Pittsburgh seam bituminous coal dust, lycopodium spores, and polyethylene powder with a 1.2-L furnace and 8-L and 20-L chambers. Thermal autoignition temperatures of the same dusts were measured in the 1.2-L furnace. Electrical-ignition requirements are given in terms of both effective spark-gap energies, and stored circuit energies, 1/2 CE2. The measured order of electrical ignitability for the three dusts is consistent with the data of other researchers; however, the absolute values are systematically higher, probably because of higher flow and turbulence levels in the chambers used and lower electrical efficiency in the circuit used here. However, some valuable information may be obtained from the relative ignition energies of various dusts at ambient and elevated temperatures. In addition, the concept of minimum electrical ignition energies for homogeneous gas mixtures is reevaluated theoretically.
- Research Organization:
- Bureau of Mines, Pittsburgh, PA (USA). Pittsburgh Research Center
- OSTI ID:
- 5962218
- Report Number(s):
- PB-86-156403/XAB; BM-RI-8988
- Country of Publication:
- United States
- Language:
- English
Similar Records
Improved 6. 8-L furnace for measuring the autoignition temperatures of dust clouds
Improved 6. 8-L furnace for measuring the autoignition temperatures of dust clouds. Report of investigations/1993