Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

A planar gradiometer based on a microwave rf-SQUID

Conference · · IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States)
OSTI ID:5923891
; ;  [1]
  1. Institute of Thin Film and Ion Technology, Research Centre Julich GmbH, P.O. Box 1913, 5170 Julich (DE)

This paper describes a type of gradiometer, working on the basis of a planar microwave rf SQUID. In this type of rf-SQUID, a superconducting half-wavelength stripline resonator serves as tank circuit, into which the SQUID is integrated. If a gradiometer configuration is used for the SQUID (i.e. two loops), a certain asymmetry of the stripline resonator should be provided to ensure sufficient coupling between gradiometer and resonator. For first experiments, gradiometers were prepared from thin Niobium films on sapphire substrates, having either microbridges or tunnel junctions as Josephson elements. When operated in hysteretic mode, modulation voltages of about 100 {mu}V were measured for both microbridge- and tunnel junction SQUIDs.

OSTI ID:
5923891
Report Number(s):
CONF-900944--
Journal Information:
IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States), Journal Name: IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States) Vol. 27:2; ISSN IEMGA; ISSN 0018-9464
Country of Publication:
United States
Language:
English