Titanium alloy, bars, wire, forgings, and rings 6A1 6V 2Sn annealed, heat treatable. (SAE standard)

Technical Report · Sat Jun 01 00:00:00 EDT 1996

OSTI ID:591023

This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, and stock for forging or flash welded rings. These products have been typically used for parts to be machined in the annealed condition and requiring high strength ratio up to 750 degrees F (399 degrees C) after solution and precipitation heat treatment, but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP982 recommends practices to minimize such conditions. Alloy: 6-6-2 UNS Number: R5662.

• Research Organization: Society of Automotive Engineers, Inc., Warrendale, PA (United States)
• OSTI ID: 591023
• Report Number(s): SAE-AMS-4971E/XAB; TRN: 80903266
• Resource Relation: Other Information: DN: Copyright Society for Automotive Engineers (SAE), 400 Commonwealth Drive, Warrendale, PA. 15096, USA. This document is available from NTIS under license from SAE. See also MIL-T-9047, Composition 8, MIL-T-9047, Composition 8; PBD: Jun 1996
• Country of Publication: United States
• Language: English

Related Subjects

36 MATERIALS SCIENCE
STANDARDS
WIRES
TITANIUM BASE ALLOYS
ALUMINIUM ALLOYS
VANADIUM ALLOYS
TIN ALLOYS
FORGING
SPECIFICATIONS