TNsCA calculations and measurements for the SLAC slc damping ring dipole magnet

Conference · Tue Oct 01 04:00:00 EDT 1985 · IEEE Trans. Nucl. Sci.; (United States)

OSTI ID:5898470

Early, R A; Cobb, J K

The SLAC damping ring dipole magnet was originally designed with removable nose pieces at the ends. Recently, a set of magnetic measurements was taken of the vertical component of induction along the center of the magnet for four different pole-end configurations and several current settings. The three dimensional computer code TOSCA, which is currently installed on the National Magnetic Fusion Energy Computer Center's Cray X-MP, was used to compute field values for the four configurations at current settings near saturation. Comparisons were made for magnetic induction as well as effective magnetic lengths for the different configurations.

• Research Organization: Stanford Linear Accelerator Center, Stanford University, Stanford, CA
• OSTI ID: 5898470
• Report Number(s): CONF-850504-
• Conference Information: Journal Name: IEEE Trans. Nucl. Sci.; (United States) Journal Volume: NS-32:5
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
430303* -- Particle Accelerators-- Experimental Facilities & Equipment
ACCELERATOR FACILITIES
ACCELERATORS
COMPUTER CODES
COMPUTERIZED SIMULATION
DAMPING
DIPOLES
LINEAR ACCELERATORS
MAGNETIC DIPOLES
MAGNETIC FIELD CONFIGURATIONS
MEASURING METHODS
MULTIPOLES
SIMULATION
STANFORD LINEAR COLLIDER
T CODES