Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Amplifier-Discriminator-Multiplexor card

Technical Report ·
DOI:https://doi.org/10.2172/5898167· OSTI ID:5898167
The Amplifier-Discriminator-Multiplexor (ADM) card described was designed for the External Muon Identifier at the 15 ft Bubble Chamber. The general scheme of the data readout of the External Muon Identifier is based on the use of a master clock. The ADM card serves to amplify the signals from the proportional tubes, discriminate them, latch the signals in parallel into a shift register. The data are then shifted out serially to the Time Digitizing System, using the master clock. The shift registers are loaded, and the latches are reset every sixteen cycles of the master clock. (LEW)
Research Organization:
Fermi National Accelerator Lab., Batavia, IL (USA)
DOE Contract Number:
AC02-76CH03000
OSTI ID:
5898167
Report Number(s):
FNAL-TM-1384; ON: DE86009136
Country of Publication:
United States
Language:
English