Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Modeling gadolinium-bearing fuel in Ringhals PWRs using CASMO/SIMULATE

Conference · · Transactions of the American Nuclear Society; (United States)
OSTI ID:5886323
 [1]
  1. Vattenfall AB, Ringhals, Varoebacka (Sweden)

Ringhals units 2, 3, and 4 are Westinghouse three-loop, 157-assembly pressurized water reactors (PWRs) operated by Vattenfall. Originally, all three reactors were loaded in an out-in scheme using reload fuel without burnable poisons. In recent cycles, gadolinium-bearing fuel was introduced to enable a low-leakage loading pattern and minimize fuel cycle costs. This paper focuses on the Fragema 17 x 17 AFA design with peripheral gadolinium rods loaded in units 3 and 4. The Ringhals units are modeled using the Studsvik core management system, consisting of the CASMO-3 transport theory lattice physics code,and the SIMULATE-3 advanced nodal reactor analysis code. The results of the studies verifying the accuracy of CASMO-3/SIMULATE-3 on the assemblies with peripheral gadolinium rods are presented in this paper. The verification was carried out against CASMO-3 color-set calculations and measured reactor data.

OSTI ID:
5886323
Report Number(s):
CONF-930601--
Journal Information:
Transactions of the American Nuclear Society; (United States), Journal Name: Transactions of the American Nuclear Society; (United States) Vol. 68; ISSN 0003-018X; ISSN TANSAO
Country of Publication:
United States
Language:
English