skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Superconducting tapes with critical current density of 10 sup 4 A/cm sup 2 at 77 K and zero magnetic field

Conference · · IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States)
OSTI ID:5877928
; ; ; ; ; ; ;  [1];  [2]
  1. New York State Inst. on Superconductivity, State Univ. of New York at Buffalo, Buffalo, NY (US)
  2. General Electric Co., Schenectady, NY (United States). Corporate Research and Development Center

This paper reports on critical current density above 10{sup 4} A/cm{sup 2} at both YBa{sub 2}Cu{sub 3}O{sub 6.8} (YBCO) thin films on metallic substrates and Bi-based superconducting films on silver tapes. A transition buffer, consisting of sub-buffers deposited at different temperatures, was used to enhance the crystallinity and the transport properties of YBCO films on metallic substrates. YBCO films were fabricated, using in-situ laser deposition, and they were strongly c-axis oriented. Critical temperature of 87 K and critical current density of 3 {times} 10{sup 4} A/cm{sup 2} at 77 K were obtained for a 0.5 {mu}m-thick YBCO film. Also, the magnetic field dependence of J{sub c} could be increased by using Pt-coated metallic substrates. For 10 {approximately} 20 {mu}m-thick Bi-based superconducting tape, by using brush-on technique and heat treatment, critical current of 10{sup 4} A/cm{sup 2} at 77 K was obtained.

OSTI ID:
5877928
Report Number(s):
CONF-900944-; CODEN: IEMGA
Journal Information:
IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States), Vol. 27:2; Conference: 1990 applied superconductivity conference, Snowmass, CO (United States), 24-28 Sep 1990; ISSN 0018-9464
Country of Publication:
United States
Language:
English