High voltage pulse cable and connector experience in the kicker systems at SLAC

Conference · Wed May 01 04:00:00 EDT 1991

OSTI ID:5859895

Harris, K; Artusy, M; Donaldson, A; Mattison, T

The SLAC 2-mile linear accelerator uses a wide variety of pulse kicker systems that require high voltage cable and connectors to deliver pulses from the drivers to the magnet loads. Many of the drivers in the SLAC kicker systems use cable lengths up to 80 feet and are required to deliver pulses up to 40 kV, with rise and fall time on the order of 20 ns. Significant pulse degradation from the cable and connector assembly cannot be tolerated. Other drivers are required to deliver up to 80 kV, 20 {mu}s pulses over cables 20 feet long. Several combinations of an applicable high voltage cable and matching connector have been used at SLAC to determine the optimum assembly that meets the necessary specifications and is reliable. 14 refs., 3 figs., 1 tab.

• Research Organization: Stanford Linear Accelerator Center, Menlo Park, CA (USA)
• Sponsoring Organization: DOE; USDOE, Washington, DC (USA)
• DOE Contract Number: AC03-76SF00515
• OSTI ID: 5859895
• Report Number(s): SLAC-PUB-5489; CONF-910505--103; ON: DE91012966
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
430300* -- Particle Accelerators-- Auxiliaries & Components
ACCELERATOR FACILITIES
ACCELERATORS
CABLES
CONDUCTOR DEVICES
CONNECTORS
ELECTRIC CABLES
ELECTRICAL EQUIPMENT
ELECTROMAGNETS
EQUIPMENT
KICKER MAGNETS
LINEAR ACCELERATORS
MAGNETS
PULSES
RELIABILITY
STANFORD LINEAR COLLIDER
TESTING