Advanced helium purge seals for Liquid Oxygen (LOX) turbopumps. Final report, September 1985-August 1987
Program objectives were to determine three advanced configurations of helium buffer seals capable of providing improved performance in a space shuttle main engine (SSME), high-pressure liquid oxygen (LOX) turbopump environment, and to provide NASA with the analytical tools to determine performance of a variety of seal configurations. The three seal designs included solid-ring fluid-film seals often referred to as floating ring seals, back-to-back fluid-film face seals, and a circumferential sectored seal that incorporated inherent clearance adjustment capabilities. Of the three seals designed, the sectored seal is favored because the self-adjusting clearance features accommodate the variations in clearance that will occur because of thermal and centrifugal distortions without compromising performance. Moreover, leakage can be contained well below the maximum target values; minimizing leakage is important on the SSME since helium is provided by an external tank. A reduction in tank size translates to an increase in payload that can be carried on board the shuttle. The computer codes supplied under this program included a code for analyzing a variety of gas-lubricated, floating ring, and sector seals; a code for analyzing gas-lubricated face seals; a code for optimizing and analyzing gas-lubricated spiral-groove face seals; and a code for determining fluid-film face seal response to runner excitations in as many as five degrees of freedom. These codes proved invaluable for optimizing designs and estimating final performance of the seals described.
- Research Organization:
- Mechanical Technology, Inc., Latham, NY (USA)
- OSTI ID:
- 5829565
- Report Number(s):
- N-89-21239; NASA-CR-182105; NAS-1.26:182105; MTI-87TR72
- Country of Publication:
- United States
- Language:
- English
Similar Records
Wear modes active in angular contact ball bearings operating in liquid oxygen environment of the Space Shuttle turbopumps
Simulation study with arbitrary profile liquid annular seals