Production rates and costs of whole-tree, tree length, and log-length skyline thinning

Journal Article · Fri Jun 01 04:00:00 EDT 1984 · For. Prod. J.; (United States)

OSTI ID:5804806

Putman, N E; Kellogg, L D; Olsen, E D

Production rates and costs were determined for harvesting smallwood by different methods of skyline yarding: whole-tree (yarding with limbs and tops), tree-length (bucking done on the landing), and log-length (limbing, topping, and bucking done on the slope). A rubber-tired skidder was used to swing and sort the variously cut trees from the landing to a site on the haul road for further processing. The production rates for the felling and yarding cycles of each logging method were predicted from regression equations. Felling production rates were 3.60 cubic m. per hour for log length, 4.70 cubic m. per hour for tree length, and 6.17 cubic m. per hour for whole-tree. Yarding production rates were 5.52 cubic m. per hour for log length and 5.83 cubic m. per hour for both tree-length and whole tree. Cost analysis indicated that, where feasible, cold decking (stacking in front of the yarder) of log-length material is the most cost-effective method because it eliminates the need for a skidder to swing the logs. However, where cold decking is not feasible and a skidder is used, the whole-tree method is the next least expensive: cost per unit is 12% less than log-length yarding. 9 references.

• Research Organization: Oregon State Univ., Corvallis
• OSTI ID: 5804806
• Journal Information: For. Prod. J.; (United States), Journal Name: For. Prod. J.; (United States) Vol. 34:6; ISSN FPJOA
• Country of Publication: United States
• Language: English

Related Subjects

09 BIOMASS FUELS
140504* -- Solar Energy Conversion-- Biomass Production & Conversion-- (-1989)
BIOMASS PLANTATIONS
COMPARATIVE EVALUATIONS
COST
DIMENSIONS
EQUIPMENT
HARVESTING
HARVESTING EQUIPMENT
LENGTH
MATHEMATICS
OPERATING COST
PLANTS
PRODUCTIVITY
REGRESSION ANALYSIS
STATISTICS
TREES