Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Stress-induced borehole elongation: A comparison between the four-arm dipmeter and the borehole televiewer in the Auburn geothermal well

Journal Article · · J. Geophys. Res.; (United States)
The nature and origin of borehole elongation recorded by the four-arm dipmeter calipers is studied utilizing information obtained from hydraulic fracturing stress measurements and borehole televiewer data taken in a well located in Auburn, New York. A preferred orientation N10/sup 0/W-S10/sup 0/E, +- 10/sup 0/ and a less prominant E-W orientation of borehole elongation, was observed on two runs of the dipmeter. Comparisons of borehole geometry determined using the televiewer and the dipmeter show that both tools give the same orientation of borehole elongation provided that the zone of elongation is longer than 30 cm. Comparisons of dipmeter caliper data with orientation of in situ stress and natural fractures, obtained from hydrofracturing tests and televiewer data show that the N10/sup 0/W-S10/sup 0/E borehole elongations (1) are axisymmetric, (2) are aligned with the minimum horizontal stress S/sub h/, and (3) are not associated with natural fractures intersecting the well. These elongations are interpreted as stress-induced well bore breakouts. The E-W elongation direction is characterized by an asymmetric borehole cross section in thinly bedded rocks and is not caused by breakouts. This asymmetric geometry can be discriminated from breakouts using the oriented electric measurements provided by the dipmeter. This study demonstrates that the dipmeter can be used to determine the orientation of S/sub h/ (by mapping breakouts), confirming the results of earlier less detailed studies, and provides a firm basis for mapping regional stress patterns using existing dipmeter data.
Research Organization:
Schlumberger-Doll Research, Ridgefield, Connecticut
OSTI ID:
5801827
Journal Information:
J. Geophys. Res.; (United States), Journal Name: J. Geophys. Res.; (United States) Vol. 90:B7; ISSN JGREA
Country of Publication:
United States
Language:
English