Operational experience with SLC damping ring kicker magnets
Conference
·
OSTI ID:5738936
The damping ring kickers for the SLAC Linear Collider must provide 7 mrad kicks to 1.2 GeV beams with 60 nsec rise and fall times and fit in a 50 cm length around a 21 mm diameter ceramic beam pipe. This requires that they operate at up to 40 KV. The construction and operation of two types of quasi-coaxial ferrite magnet potted with RTV silicone rubber is discussed. Production yield has been improved by changes in RTV degassing, transfer, and cure. Operation lifetime is dominated by voltage, radiation, and thermal cycling. 4 refs., 2 figs.
- Research Organization:
- Stanford Linear Accelerator Center, Menlo Park, CA (USA)
- Sponsoring Organization:
- DOE; USDOE, Washington, DC (USA)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 5738936
- Report Number(s):
- SLAC-PUB-5460; CONF-910505--302; ON: DE91014554
- Country of Publication:
- United States
- Language:
- English
Similar Records
Manufacture of fast-pulsed magnets for the SLC damping rings
Manufacture of fast-pulsed magnets for the SLC damping rings
Fast and reliable kicker magnets for the SLC damping rings
Conference
·
Sun Jun 23 00:00:00 EDT 1991
· IEEE Transactions on Magnetics
·
OSTI ID:5333858
Manufacture of fast-pulsed magnets for the SLC damping rings
Conference
·
Tue Dec 31 23:00:00 EST 1991
· IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States)
·
OSTI ID:5272794
Fast and reliable kicker magnets for the SLC damping rings
Conference
·
Thu Jun 01 00:00:00 EDT 1995
·
OSTI ID:71397