A component synthesis method using Lanczos vectors
Conference
·
OSTI ID:5733620
A component synthesis technique has been developed, which uses a combination of constraint modes and fixed interface Lanczos vectors. The sequence of Lanczos vectors are obtained via a recursion equation similar to inverse iteration and mass orthonormalized to the previously derived vectors. The static solution of a problem of interest or a set of random vectors can be used as the initial Lanczos vector in the sequence. The fixed interface Lanczos method produces a statically complete model for a given load, if the static solution is the first vector in the sequence. The subsequent Lanczos vectors, X/sub i/, in the sequence can be interpreted as being generated using the dynamic error, K/sup -I/MX/sub i-1/, of the previous vector. Including constraint modes for the boundary degrees of freedom retains physical degrees of freedom for the boundary, which allows the component to be incorporatd into the system by direct matrix assembly. The convergence characteristics of the fixed interface Lanczos method is studied using static and transient analysis. Various criteria are examined for evaluating the convergence. The results of the fixed interface Lanczos method will be compared to the component mode synthesis method developed by Hurty. 13 refs., 7 figs., 4 tabs.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (USA)
- DOE Contract Number:
- AC04-76DP00789
- OSTI ID:
- 5733620
- Report Number(s):
- SAND-87-1551C; CONF-880220-3; ON: DE88002263
- Country of Publication:
- United States
- Language:
- English
Similar Records
A component synthesis method using Lanczos vectors
Techniques for implementing statically complete component mode synthesis for forced response
Demonstration of component mode synthesis using Lanczos coordinates
Conference
·
Thu Oct 01 00:00:00 EDT 1987
·
OSTI ID:6357060
Techniques for implementing statically complete component mode synthesis for forced response
Conference
·
Wed Dec 31 23:00:00 EST 1986
·
OSTI ID:6720150
Demonstration of component mode synthesis using Lanczos coordinates
Technical Report
·
Fri May 29 00:00:00 EDT 1987
·
OSTI ID:6593280