skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Development of superconducting electrode capacitor using a YBa sub 2 Cu sub 3 O sub 7 minus x thick film and Y sub 2 BaCuO sub 5 dielectric

Conference · · IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States)
OSTI ID:5690379
; ; ;  [1]
  1. Mechanical and Electrical Engineering Dept., Florida International Univ., Miami, FL (US)

Different phases in the YO{sub 1.5}-BaO-CuO phase diagram were evaluated for dielectric properties and compatibility with subsequent firing of a YBa{sub 2}Cu{sub 3}O{sub 7{minus}x} thick film. Y{sub 2}BaCuO{sub 5} (211) was chosen for capacitor manufacture because it showed no reaction with the YBa{sub 2}Cu{sub 3}O{sub 7{minus}x} (123) thick film upon sintering. AC field exclusion confirmed that superconductivity of the 123 thick film on the 211 substrate with T{sub c} at 93{degrees}K. Scanning electron microscopy of the interface between the 211 substrate and the 123 thick film showed neither a reaction or the formation of a third phase. Capacitor samples were manufactured in various sizes. The authors of this paper conclude that 211 substrates are suitable for the formation of a low-loss capacitor with superconducting electrodes.

OSTI ID:
5690379
Report Number(s):
CONF-900944-; CODEN: IEMGA
Journal Information:
IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States), Vol. 27:2; Conference: 1990 applied superconductivity conference, Snowmass, CO (United States), 24-28 Sep 1990; ISSN 0018-9464
Country of Publication:
United States
Language:
English