Development of the DWPF canister temporary shrink-fit seal
The Defense Waste Processing Facility is being constructed at The Savannah River Plant for the containerization of high-level nuclear waste in a wasteform for eventual permanent disposal. The waste will be incorporated in molten glass and solidified in type 304L stainless steel canisters, 2-feet in diameter x 9-feet 10-inches long, containing a flanged 6-in.-diam pipe fill-nozzle. The canisters have a minimum wall thickness of 3/8 in. Utilizing the heat from the glass filling operation, a shrink-fit seal for a plug in the end of the canister fill nozzle was developed that: will withstand the radioactive environment; will prevent the spread of contamination, and will keep moisture and water from entering the canister during storage and decontamination of the canister by wet-frit blasting to remove smearable and oxide-film fixed radioactive nuclides; is removable and can be replaced by a new oversize plug in the event the seal fails the pressure decay leakage test (<2 x 10/sup -4/ atm cc/sec helium); will keep the final weld closure clean and free of nuclear contamination; will withstand being pressed into the nozzle without exposing external contamination or completely breaking the seal; is reliable; and is easily installed. The seal consists of: a removable sleeve (with a tapered bore) which is shrink-fitted into the nozzle bore during canister fabrication; and a tapered plug which is placed into the sleeved nozzle after the canister is filled with radioactive molten glass. A leak-tight shrink-fit seal is formed between the nozzle, sleeve, and plug upon temperature equilibrium. The temporarily sealed canister is transferred from the Melt cell to the Decon cell, and the surface is decontaminated. Next it is transferred to the Weld/Test cell where the temporary seal is pressed down into the nozzle, revealing a clean cavity where the canister final closure weld is made.
- Research Organization:
- Du Pont de Nemours (E.I.) and Co., Aiken, SC (USA). Savannah River Lab.
- DOE Contract Number:
- AC09-76SR00001
- OSTI ID:
- 5666207
- Report Number(s):
- DP-1720; ON: DE86011912
- Country of Publication:
- United States
- Language:
- English
Similar Records
Proper procedures are the key to welding radioactive waste canisters
SRL canister impact tests
Related Subjects
CONTAINERS
CLOSURES
HIGH-LEVEL RADIOACTIVE WASTES
VITRIFICATION
RADIOACTIVE WASTE PROCESSING
MANAGEMENT
MATERIALS
PROCESSING
RADIOACTIVE MATERIALS
RADIOACTIVE WASTES
WASTE MANAGEMENT
WASTE PROCESSING
WASTES
052001* - Nuclear Fuels- Waste Processing