Brittle-ductile transition in rocks
The deformational characteristics of 2 limestones, one gabbro, and one dunite have been investigated as a function of confining pressure. It was found, that friction of these rocks and friction of granite and serpentinite studied elsewhere are nearly identical, and that the brittle-ductile transition pressure is simply the pressure at which the stress required to form a fault is equal to the stress required to cause sliding on the fault. The transition pressure is higher in extension than it is in compression. This difference occurs because the frictional shear stress required to cause sliding is determined not by confining pressure but by the principal stresses and the angle of the fault. For the same frictional shear stress on a fault surface, the confining pressure is much higher in extension than it is in compression. (19 refs.)
- Research Organization:
- US Geological Survey
- OSTI ID:
- 5656090
- Journal Information:
- J. Geophys. Res.; (United States), Journal Name: J. Geophys. Res.; (United States) Vol. 73:14; ISSN JGREA
- Country of Publication:
- United States
- Language:
- English
Similar Records
Shearing of saturated clays in rock joints at high confining pressures
Brittle-ductile transitions in a metallic glass
Related Subjects
580100* -- Geology & Hydrology-- (-1989)
BRITTLE-DUCTILE TRANSITIONS
CARBONATE ROCKS
COMMINUTION
COMPRESSION STRENGTH
DEFORMATION
FRACTURING
GABBROS
GEOLOGIC FAULTS
GEOLOGIC STRUCTURES
IGNEOUS ROCKS
LIMESTONE
MECHANICAL PROPERTIES
PLUTONIC ROCKS
POROSITY
ROCKS
SEDIMENTARY ROCKS
SHEAR PROPERTIES
STRESSES