Cost of induction Linac drivers for inertial fusion for various target yields
Conference
·
· AIP Conf. Proc.; (United States)
OSTI ID:5636806
The cost of induction linac accelerators for inertial fusion using mass 200 ions at a charge state of +3 for target yields of 300, 600, and 1200 MJ is presented. The ions are injected into the accelerator at 3 MV, and accelerated to the required voltage appropriate to the desired target yield. A cost comparison of the low voltage portion of the accelerator (3--50 MV) is made between a system with 64 and one with 16 superconducting quadrupoles. The design of the low voltage portion which yields the minimum-cost accelerator designs for several target yields and a fusion power of 3000 MW is presented.
- Research Organization:
- Lawrence Livermore National Laboratory, Box 808, Livermore, CA 94550
- DOE Contract Number:
- AC03-76SF00098
- OSTI ID:
- 5636806
- Report Number(s):
- CONF-860510-
- Journal Information:
- AIP Conf. Proc.; (United States), Journal Name: AIP Conf. Proc.; (United States) Vol. 152:1; ISSN APCPC
- Country of Publication:
- United States
- Language:
- English
Similar Records
Cost of induction linac driver for inertial fusion for various target yields
Comparison of the design and costs of induction linac drivers for inertial fusion using ions of mass 133 and 200
A comparison of the design and costs of induction LINAC drivers for inertial fusion using ions of mass 133 and 200
Conference
·
Thu May 01 00:00:00 EDT 1986
·
OSTI ID:5517028
Comparison of the design and costs of induction linac drivers for inertial fusion using ions of mass 133 and 200
Conference
·
Sun Jun 01 00:00:00 EDT 1986
·
OSTI ID:5225064
A comparison of the design and costs of induction LINAC drivers for inertial fusion using ions of mass 133 and 200
Conference
·
Fri Oct 31 23:00:00 EST 1986
· Fusion Technol.; (United States)
·
OSTI ID:6832816