Construction of the molten salt pump and valve loops

Technical Report · Wed May 01 04:00:00 EDT 1991

DOI:https://doi.org/10.2172/5627443· OSTI ID:5627443

Bator, P A; Dowling, R L ^[1]

---

1. Babcock and Wilcox Co., Barberton, OH (USA). Nuclear Equipment Div.

The purpose of the molten salt pump and valve test loop is to demonstrate the performance, reliability, and lifetime of full-scale hot and cold salt pumps and valves for use in commercial salt-in-tube receiver solar power plant. The test hardware consists of two pumped loops, one to simulate the hot side of the receiver at a temperature of 565{degrees}C (referred to as the hot loop) and one to simulate the receiver's cold side at 285{degrees}C (referred to as the cold loop). Each loop contains a pump and five representative valves sized for a 60-MW{sub e} commercial solar power plant using molten salt heat transport fluid. The test loop is part of the Molten Salt Subsystem/Component Test Experiment, which is being conducted to reduce the technical risk of building and operating commercial solar central receiver plants. The project, managed by Sandia National Laboratories with Babcock and Wilcox as the prime contractor, is cost shared by the US Department of Energy and six contractors. 25 figs., 9 tabs.

• Research Organization: Sandia National Labs., Albuquerque, NM (USA); Babcock and Wilcox Co., Barberton, OH (USA). Nuclear Equipment Div.
• Sponsoring Organization: DOE; USDOE, Washington, DC (USA)
• DOE Contract Number: AC04-76DP00789
• OSTI ID: 5627443
• Report Number(s): SAND90-7031; ON: DE91014328
• Country of Publication: United States
• Language: English

Related Subjects

14 SOLAR ENERGY
140700* -- Solar Thermal Power Systems
42 ENGINEERING
420500 -- Engineering-- Materials Testing
CENTRAL RECEIVERS
COMMERCIALIZATION
CONTROL EQUIPMENT
CSP
Concentrating Solar Power
EQUIPMENT
FABRICATION
FEASIBILITY STUDIES
FLOW REGULATORS
MOLTEN SALTS
POWER PLANTS
PUMPS
SALTS
SEALS
SOLAR POWER PLANTS
SOLAR RECEIVERS
SOLAR THERMAL POWER PLANTS
TESTING
THERMAL POWER PLANTS
VALVES
WEAR