Reactive flow model development for PBXW-126 using modern nonlinear optimization methods
- Lawrence Livermore National Laboratory, PO Box 808, L-282, Livermore, California 94550 (United States)
The initiation and detonation behavior of PBXW-126 has been characterized and is described. PBXW-126 is a composite explosive consisting of approximately equal amounts of RDX, AP, AL, and NTO with a polyurethane binder. The three term ignition and growth of reaction model parameters (ignition+two growth terms) have been found using nonlinear optimization methods to determine the {open_quotes}best{close_quotes} set of model parameters. The ignition term treats the initiation of up to 0.5{percent} of the RDX. The first growth term in the model treats the RDX growth of reaction up to 20{percent} reacted. The second growth term treats the subsequent growth of reaction of the remaining AP/AL/NTO. The unreacted equation of state (EOS) was determined from the wave profiles of embedded gauge tests while the JWL product EOS was determined from cylinder expansion test results. The nonlinear optimization code, NLQPEB/GLO, was used to determine the {open_quotes}best{close_quotes} set of coefficients for the three term Lee-Tarver ignition and growth of reaction model. {copyright} {ital 1996 American Institute of Physics.}
- Research Organization:
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 561681
- Report Number(s):
- CONF-950846-; ISSN 0094-243X; TRN: 9716M0024
- Journal Information:
- AIP Conference Proceedings, Vol. 370, Issue 1; Conference: American Physical Society biennial conference on shock compression of condensed matter, Seattle, WA (United States), 13-18 Aug 1995; Other Information: PBD: May 1996
- Country of Publication:
- United States
- Language:
- English
Similar Records
Detonation properties of the non-ideal explosive PBXW-123
An Improved Reaction Rate Equation for Simulating the Ignition and Growth of Reaction in High Explosives