Rate limiting mechanism of transition metal gettering in multicrystalline silicon
- Lawrence Berkeley National Lab., CA (United States)
- Toyota Technological Inst., Nagoya (Japan)
- Univ. of California, Berkeley, CA (United States). Dept. of Materials Science
The authors have performed studies on multicrystalline silicon used for solar cells in the as-grown state and after a series of processing and gettering steps. The principal goal of this work is to determine the rate limiting step for metal impurity gettering from multicrystalline silicon with an emphasis on the release of impurities from structural defects. Synchrotron-based x-ray fluorescence mapping was used to monitor the release process. Copper and nickel impurities were found to reside primarily at dislocations in the as-grown state of the material. Short annealing treatments rapidly dissolved the impurity agglomerates. Based on these results and modeling of the dissolution process, copper and nickel is in the form of small agglomerates (< 10 nm) clustered together over micron-scale regions in the as-grown material. Aluminum gettering further disintegrated the agglomerates to below the sensitivity of the system, 2--5 nm in radii. No significant barrier to release of copper or nickel from dislocations was observed.
- Research Organization:
- Lawrence Berkeley National Lab., CA (United States)
- Sponsoring Organization:
- USDOE Office of Energy Research, Washington, DC (United States)
- DOE Contract Number:
- AC03-76SF00098
- OSTI ID:
- 554829
- Report Number(s):
- LBNL--40675; CONF-970788--; LSBL--399; ON: DE97054559
- Country of Publication:
- United States
- Language:
- English
Similar Records
Interactions of structural defects with metallic impurities in multicrystalline silicon
Release of metal impurities from structural defects in polycrystalline silicon