Applicability of repassivation potential for long-term prediction of localized corrosion of Alloy 825 and type 316L stainless steel
- Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses
Repassivation potential (E[sub rp]) was investigated for use as a parameter in the long-term prediction of pitting resistance of two Fe-Ni-Cr-Mo alloys that are candidate materials for high-level nuclear waste containers. This potential was found to be independent of the extent of prior pit growth for alloy 825 (UNS N08825) and type 316 L (UNS S31603) stainless steel (SS). Repassivation potential decreased by an increase in backward scan rate after pits were grown under potentiostatic conditions. This was related to the effect of potential on repassivation time. The corrosion potential (E[sup corr]) in simulated pit-crevice solutions increased with a decrease in pH and was independent of chloride (CL[sup [minus]]) concentration even to the point of depassivation. The depassivation pH (pH[sub D]) was independent of Cl[sup [minus]] concentration and increased slightly with an increase in temperature. The relationship between repassivation potential and E[sub corr] in simulated pit solutions was discussed. It was hypothesized that the repassivation potential for shallow pits was related to the time-dependent alteration of solution composition inside the pits and that the repassivation potential for deep pits was related to E[sub corr] of the depassivated metal inside the pit modified by the ohmic potential drop in the pit.
- OSTI ID:
- 5529601
- Journal Information:
- Corrosion (Houston); (United States), Vol. 49:11; ISSN 0010-9312
- Country of Publication:
- United States
- Language:
- English
Similar Records
Effect of applied potential on changes in solution chemistry inside crevices on type 304L stainless steel and alloy 825
An electrochemical approach to predicting long-term localized corrosion of corrosion-resistant high-level waste container materials
Related Subjects
42 ENGINEERING
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
CONTAINERS
CORROSION RESISTANT ALLOYS
INCOLOY 825
PASSIVATION
RADIOACTIVE WASTE DISPOSAL
STAINLESS STEEL-316L
CHLORIDES
CORROSION RESISTANCE
CREVICE CORROSION
HIGH-LEVEL RADIOACTIVE WASTES
PH VALUE
PITTING CORROSION
UNDERGROUND DISPOSAL
ALLOY-NI43FE30CR22MO3
ALLOYS
ALUMINIUM ADDITIONS
ALUMINIUM ALLOYS
AUSTENITIC STEELS
CHEMICAL REACTIONS
CHLORINE COMPOUNDS
CHROMIUM ALLOYS
CHROMIUM-NICKEL STEELS
CHROMIUM-NICKEL-MOLYBDENUM STEELS
COPPER ALLOYS
CORROSION
HALIDES
HALOGEN COMPOUNDS
HEAT RES
HEAT RESISTANT MATERIALS
HEAT RESISTING ALLOYS
HIGH ALLOY STEELS
INCOLOY ALLOYS
IRON ALLOYS
IRON BASE ALLOYS
MANAGEMENT
MATERIALS
MOLYBDENUM ALLOYS
NICKEL ALLOY
NICKEL ALLOYS
NICKEL BASE ALLOYS
RADIOACTIVE MATERIALS
RADIOACTIVE WASTE MANAGEMENT
RADIOACTIVE WASTES
STAINLESS STEELS
STEEL-CR17NI12MO3-L
STEELS
WASTE DISPOSAL
WASTE MANAGEMENT
WASTES
360105* - Metals & Alloys- Corrosion & Erosion
420204 - Engineering- Shipping Containers
052002 - Nuclear Fuels- Waste Disposal & Storage