Laser generation and transport of a relativistic electron beam
A foilless diode usually requires an externally applied magnetic field to control expansion and transport of a relativistic electron beam. A new foilless diode has been developed that does not require an external magnetic field. A low pressure organic gas is introduced into the diode and the transport region. A uv laser beam is injected through the transport region and is terminated at the cathode. The laser photoionizes the low pressure gas forming an ionized channel that captures the electron beam near the cathode. The electron beam is focused and guided by electrostatic attraction to the ionized channel. A 1.5-MeV, 20-kA electron beam has been generated and transported 1 m using this technique. The laser was replaced by an 800-V, 250-ma, low-energy electron beam which was used to guide the relativistic electron beam 4 m through a 90/sup 0/ bend.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (USA); Mission Research Corp., Albuquerque, NM (USA)
- DOE Contract Number:
- AC04-76DP00789
- OSTI ID:
- 5526863
- Report Number(s):
- SAND-85-0042C; CONF-850504-30; ON: DE85011709
- Resource Relation:
- Conference: Particle accelerator conference, Vancouver, Canada, 13 May 1985
- Country of Publication:
- United States
- Language:
- English
Similar Records
Laser-based foilless diode
Laser-based foilless diode
Related Subjects
AIR
BEAM TRANSPORT
ELECTRON BEAMS
KILO AMP BEAM CURRENTS
DIODE TUBES
LASER RADIATION
LINEAR ACCELERATORS
MEV RANGE 01-10
PHOTOIONIZATION
RELATIVISTIC RANGE
ACCELERATORS
BEAM CURRENTS
BEAMS
CURRENTS
ELECTROMAGNETIC RADIATION
ELECTRON TUBES
ENERGY RANGE
FLUIDS
GASES
IONIZATION
LEPTON BEAMS
MEV RANGE
PARTICLE BEAMS
RADIATIONS
430200* - Particle Accelerators- Beam Dynamics
Field Calculations
& Ion Optics