Window frame or ''superferric'' magnet design for low B(<3T) heavy ion storage ring study
Double magnets share common laminations without magnetic coupling. Single layer coils of rectangular conductor are dry wound on extruded bore tubes. Magnet construction requires no molding or prestress. Absence of superconducting (SC) magnetization fields in the aperture results in very large dynamic range. The coil is wound continuously across the modplane to give unusually large dynamic aperture. Above approx.2.2 T saturation is corrected by simple sextupole windings with no inductive coupling to the dipole. Ultrastable design requires no internal quench protection. A quadrupole pair of novel design gives excellent field quality to B > 2 T without corrections, with no SC magnetization. Experience shows magnets are accurate enough for the assembly to take place at its final location. No training is required. Test procedures (measurements with search coils or with the beam) and cooldown properties are discussed. 2 refs., 8 figs., 1 tab.
- Research Organization:
- Brookhaven National Lab., Upton, NY (USA)
- DOE Contract Number:
- AC02-76CH00016
- OSTI ID:
- 5526373
- Report Number(s):
- BNL-36557; CONF-850504-154; ON: DE85013288
- Resource Relation:
- Conference: Particle accelerator conference, Vancouver, Canada, 13 May 1985
- Country of Publication:
- United States
- Language:
- English
Similar Records
Corrector magnets: Combined structural analysis of collider 50 mm aperture ordered wound sextupoles intedrior section
Dynamic Aperture and Tolerances for PEP-X Ultimate Storage Ring Design
Related Subjects
STORAGE RINGS
SUPERCONDUCTING MAGNETS
DESIGN
ALIGNMENT
MAGNETIC FIELDS
ELECTRICAL EQUIPMENT
ELECTROMAGNETS
EQUIPMENT
MAGNETS
SUPERCONDUCTING DEVICES
430400* - Particle Accelerators- Storage Rings
430200 - Particle Accelerators- Beam Dynamics
Field Calculations
& Ion Optics