Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Viscosity, granular-temperature, and stress calculations for shearing assemblies of inelastic, frictional disks

Conference ·
OSTI ID:5491332

Employing non-equilibrium molecular-dynamics methods the effects of two energy loss mechanism on viscosity, stress, and granular-temperature in assemblies of nearly rigid, inelastic, frictional disks undergoing steady-state shearing are calculated. Energy introduced into the system through forced shearing is dissipated by inelastic normal forces or through frictional sliding during collisions resulting in a natural steady-state kinetic energy density (granular-temperature) that depends on the density and shear rate of the assembly and on the friction and inelasticity properties of the disks. The calculations show that both the mean deviatoric particle velocity and the effective viscosity of a system of particles with fixed friction and restitution coefficients increase almost linearly with strain rate. Particles with a velocity-dependent coefficient of restitution show a less rapid increase in both deviatoric velocity and viscosity as strain rate increases. Particles with highly dissipative interactions result in anisotropic pressure and velocity distributions in the assembly, particularly at low densities. At very high densities the pressure also becomes anisotopic due to high contact forces perpendicular to the shearing direction. The mean rotational velocity of the frictional disks is nearly equal to one-half the shear rate. The calculated ratio of shear stress to normal stress varies significantly with density while the ratio of shear stress to total pressure shows much less variation. The inclusion of surface friction (and thus particle rotation) decreases shear stress at low density but increases shear stress under steady shearing at higher densities.

Research Organization:
Lawrence Livermore National Lab., CA (USA)
DOE Contract Number:
W-7405-ENG-48
OSTI ID:
5491332
Report Number(s):
UCRL-91756; CONF-850289-1; ON: DE85015173
Country of Publication:
United States
Language:
English

Similar Records

Viscosity, granular-temperature, and stress calculations for shearing assemblies of inelastic, frictional disks
Journal Article · Wed Oct 01 00:00:00 EDT 1986 · J. Rheol.; (United States) · OSTI ID:5105172

Numerical simulation of inelastic frictional spheres in simple shear flow
Journal Article · Fri Dec 31 23:00:00 EST 1993 · Journal of Fluid Mechanics · OSTI ID:85463

Granular Flow Project. Quarterly report, April-June 1986
Technical Report · Mon Jun 30 00:00:00 EDT 1986 · OSTI ID:5054464