Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Testing erosion-resistant chromium carbide plasma coatings on the TVA Paradise Unit-2 intermediate pressure turbine

Technical Report ·
OSTI ID:5471552
Solid particle erosion (SPE) is caused by oxide particles in steam. Hard oxide particles exfoliate from the inside surfaces of boiler tubes and steam lines and are carried by the steam to the turbine where they impact and erode stationary and moving turbine parts (nozzles, moving blades, stationary blades, seal strips, and shrouds around the blades). The first stages of the high pressure (HP) and intermediate pressure (IP) turbines experience the greatest amount of SPE. Though many owners experience erosion in the first stages of both HP (main steam) and IP (reheat steam) turbines, TVA's principal erosion experience is in the IP or reheat steam turbines. This report is limited to the first few stages of IP turbines, referred to as ''first reheat stages.'' Hard chromium carbide plasma coatings have been developed. The coating was installed in Paradise Unit-2 IP turbine, 9th and 10th stages. Pretest inspection report is given.
Research Organization:
Tennessee Valley Authority, Chattanooga (USA). Div. of Energy Demonstrations and Technology
OSTI ID:
5471552
Report Number(s):
TVA/OP/EDT-86/27; ON: DE86901719
Country of Publication:
United States
Language:
English