Application of environmental fatigue stress rules to carbon steel reactor piping. Volume 2. Handbook. Final report
Technical Report
·
OSTI ID:5467119
The procedure for application of carbon steel environmental fatigue design rules is presented in a handbook format. The handbook encompasses a computer program that further facilitates application of these rules. This handbook outlines a step-by-step procedure for the application of carbon steel environmental fatigue design rules to piping and components which are analyzed per rules of NB-3600 and NB-3200 of the ASME Code. It is assumed that the analyst is familiar with the fatigue evaluation procedures outlined in these subparticles. The analyst should refer to the companion technical report for the background, detailed explanation, and derivation of the correction factors specified in this handbook. Compliance with these stress rules means only that the piping or component design is adequate from the standpoint of environmentally-assisted fatigue failure. Complete suitability for specified service loadings is dependent on meeting the primary stress limits for design loadings and any applicable stress limits.
- Research Organization:
- General Electric Co., San Jose, CA (USA). Nuclear Engineering Div.
- OSTI ID:
- 5467119
- Report Number(s):
- EPRI-NP-4644M-Vol.2; ON: TI86920409
- Country of Publication:
- United States
- Language:
- English
Similar Records
Application of environmental fatigue stress rules to carbon steel reactor piping. Volume 1. Executive summary. Final report
Example Evaluation of a Representative Heat Pipe Test Article Design for Structural Acceptability using ASME Design Rules
Review of the margins for ASME code fatigue design curve - effects of surface roughness and material variability.
Technical Report
·
Tue Jul 01 00:00:00 EDT 1986
·
OSTI ID:5594607
Example Evaluation of a Representative Heat Pipe Test Article Design for Structural Acceptability using ASME Design Rules
Technical Report
·
Tue Sep 01 00:00:00 EDT 2020
·
OSTI ID:1658587
Review of the margins for ASME code fatigue design curve - effects of surface roughness and material variability.
Technical Report
·
Fri Oct 03 00:00:00 EDT 2003
·
OSTI ID:925073
Related Subjects
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS
210100* -- Power Reactors
Nonbreeding
Light-Water Moderated
Boiling Water Cooled
210200 -- Power Reactors
Nonbreeding
Light-Water Moderated
Nonboiling Water Cooled
36 MATERIALS SCIENCE
360105 -- Metals & Alloys-- Corrosion & Erosion
ALLOYS
BWR TYPE REACTORS
CARBON STEELS
CHEMISTRY
COMPUTERIZED SIMULATION
CORROSION FATIGUE
DESIGN
FATIGUE
IRON ALLOYS
IRON BASE ALLOYS
MATHEMATICAL MODELS
MECHANICAL PROPERTIES
PIPES
PWR TYPE REACTORS
REACTORS
SIMULATION
SPECIFICATIONS
STEELS
STRESSES
WATER CHEMISTRY
WATER COOLED REACTORS
WATER MODERATED REACTORS
210100* -- Power Reactors
Nonbreeding
Light-Water Moderated
Boiling Water Cooled
210200 -- Power Reactors
Nonbreeding
Light-Water Moderated
Nonboiling Water Cooled
36 MATERIALS SCIENCE
360105 -- Metals & Alloys-- Corrosion & Erosion
ALLOYS
BWR TYPE REACTORS
CARBON STEELS
CHEMISTRY
COMPUTERIZED SIMULATION
CORROSION FATIGUE
DESIGN
FATIGUE
IRON ALLOYS
IRON BASE ALLOYS
MATHEMATICAL MODELS
MECHANICAL PROPERTIES
PIPES
PWR TYPE REACTORS
REACTORS
SIMULATION
SPECIFICATIONS
STEELS
STRESSES
WATER CHEMISTRY
WATER COOLED REACTORS
WATER MODERATED REACTORS