Laminar heat transfer in annular sector ducts

Journal Article · Sun Feb 01 04:00:00 EST 1987 · Journal of Heat Transfer (Transcations of the ASME (American Society of Mechanical Engineers), Series C); (United States)

DOI:https://doi.org/10.1115/1.3248052· OSTI ID:5464899

Soliman, H M ^[1]

---

1. Univ. of Manitoba, Winnipeg (Canada)

The continuing interest in compact heat exchangeers has created the need for friction factor and Nusselt number data for different passage shapes. It has long been recognized that circular tube results are generally not applicable to noncircular passages even when the hydraulic diameter is used as the characteristic dimension. Hence, design data should be generated for each passage individually, and a good source of such information is Shah and London. One duct geometry for which complete design information does not appear to be available in the open literature is that of annular sector ducts. Such configuration is encountered in multipassage internally finned tubes and many other compact het exchanger applications. The fluid flow problem for this configuration has been solved by Sparrow et al., and more recently by Niida. However, to the beest of the author's knowledge, the heat transfer results are not available yet. The purpose of this note is to summarize the analysis and results of fluid flow and heat transfer in annular sector ducts.

• OSTI ID: 5464899
• Journal Information: Journal of Heat Transfer (Transcations of the ASME (American Society of Mechanical Engineers), Series C); (United States), Journal Name: Journal of Heat Transfer (Transcations of the ASME (American Society of Mechanical Engineers), Series C); (United States) Vol. 109:1; ISSN 0022-1481; ISSN JHTRA
• Country of Publication: United States
• Language: English

Related Subjects

42 ENGINEERING
420400* -- Engineering-- Heat Transfer & Fluid Flow
ANNULAR SPACE
CONFIGURATION
DESIGN
DUCTS
ENERGY TRANSFER
FRICTION FACTOR
HEAT EXCHANGERS
HEAT TRANSFER
NUSSELT NUMBER
SPACE
TABLES