skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Development of 400/sup 0/F sealants for flat plate solar collector construction and installation. Final report, 1 October 1978-30 September 1979

Technical Report ·
DOI:https://doi.org/10.2172/5446526· OSTI ID:5446526

Twenty candidate sealants representing ten different polymer types were evaluated as potential solar collector sealants. Polymer types tested included epichlorohydrin rubber, EPDM rubber, silicone, polysulfide, acrylate rubber, and a fluoroelastomer. Initial screening of sealants consisted of measuring high temperature stability and adhesion retention. Several sealant compositions exhibited satisfactory performance in these tests and were selected for further evaluation. These materials were based on an EPDM rubber, a Viton fluoroelastomer, and silicone polymers. Further testing of these candidate materials included determination of adhesion retention under uv/water/heat conditions, fogging temperature, low temperature flexibility, and physical properties. Four silicone-based materials appeared to be suitable candidates for sealing solar collectors. These include Dow Corning 90-006-02 and 3120, General Electric 1200, and PR-1939 from Products Research and Chemical Corporation.

Research Organization:
Products Research and Chemical Corp., Glendale, CA (USA)
DOE Contract Number:
AC04-78CS35303
OSTI ID:
5446526
Report Number(s):
DOE/CS/35303-T1
Country of Publication:
United States
Language:
English