LABAN emplacement pipe load-release test and stemming/canister alignment study
Technical Report
·
OSTI ID:5446004
An Emplacement Pipe Load-Release Test and a study of downhole alignment during stemming were performed on the LABAN event. The purpose of these experiments was to determine canister and line of sight (LOS) distortion induced by downhole stemming and load-release procedures. The load-release test was aborted at approximately 40% completion due to excessive canister distortions. This report summarizes test results in terms of emplacement pipe loads vs vertical canister motions, canister and LOS lateral displacements, and the changes in LOS alignment that resulted from the downhole stemming and load-release processes.
- Research Organization:
- Lawrence Livermore National Lab., CA (USA)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 5446004
- Report Number(s):
- UCID-19989; ON: DE84006227
- Country of Publication:
- United States
- Language:
- English
Similar Records
Determination of the pipe stemming load
Emplacement and stemming load measurements; project CANNIKIN. Final report
Determination of the bounding backfill loads for lateral deflection analysis of a downhole canister
Technical Report
·
Fri Oct 19 00:00:00 EDT 1979
·
OSTI ID:5709345
Emplacement and stemming load measurements; project CANNIKIN. Final report
Technical Report
·
Sat Mar 01 00:00:00 EDT 1975
·
OSTI ID:7355126
Determination of the bounding backfill loads for lateral deflection analysis of a downhole canister
Technical Report
·
Wed May 18 00:00:00 EDT 1988
·
OSTI ID:6942705