Experiments with non-Darcy flow in joints with large scale roughness

Conference · Tue Jan 01 04:00:00 EST 1985

OSTI ID:5442755

Cornwell, D K; Murphy, H D

Joints are normally in contact at roughness asperities; consequently the relative roughness, the ratio of the asperity protrusion to the mean flow aperture, is approximately one, which is orders of magnitude greater than that encountered in more usual situations such as pipe and channel flows. In our experiments the joint roughness was idealized with sawtooth corrugations. We found that Darcy's Law became invalid for Reynolds numbers greater than about 100. Hence, for most of our studies the flow was non-Darcian, and so we adopted the usual convention of representing pressure losses in terms of an apparent friction factor. When the roughness peaks were aligned, resulting in maximum flow disturbance, the friction factor increased when the relative roughness was increased, simulating the closure of a joint due to normal-direction loading. However, when the roughness peaks were 180/sup 0/ out of phase, so that peaks were opposite valleys, the friction factor initially increased with greater relative roughness, but then decreased. 2 refs., 8 figs., 2 tabs.

• Research Organization: Los Alamos National Lab., NM (USA)
• DOE Contract Number: W-7405-ENG-36
• OSTI ID: 5442755
• Report Number(s): LA-UR-85-2454; CONF-8509129-2; ON: DE85015714
• Country of Publication: United States
• Language: English

Related Subjects

052002 -- Nuclear Fuels-- Waste Disposal & Storage
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
15 GEOTHERMAL ENERGY
152001 -- Geothermal Data & Theory-- Properties of Aqueous Solutions
58 GEOSCIENCES
580100* -- Geology & Hydrology-- (-1989)
APERTURES
BENCH-SCALE EXPERIMENTS
DARCY LAW
DATA
EXPERIMENTAL DATA
FLUID FLOW
GEOLOGIC FRACTURES
GEOLOGIC STRUCTURES
INFORMATION
NUMERICAL DATA
OPENINGS
ROUGHNESS
SURFACE PROPERTIES