Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Experiments with phase change thermal energy storage canisters for Space Station Freedom

Conference ·
OSTI ID:5437757
The solar dynamic power module proposed for the growth Space Station Freedom uses the heat of fusion of a phase change material (PCM) to efficiently store thermal energy for use during eclipse periods. The PCM, a LiF-20CaF2 salt, is contained in annular, metal canisters located in a heat receiver at the focus of a solar concentrator. PCM canister ground-based experiments and analytical heat transfer studies are discussed including the hardware test procedures and test results. After more than 900 simulated Space Station Freedom orbital cycles, no canister cracks or leaks were observed and all data were successfully collected. The effect of 1-g test orientation on canister wall temperatures was generally small while void position was strongly dependent on test orientation and canister cooling. In one test orientation, alternating wall temperature data were measured and results support an earlier theory of oscillating vortex flow in the PCM melt. Analytical canister wall temperatures compared very favorably with experimental temperature data. This illustrates that ground-based canister thermal performance can be predicted well by analyses that employ straight-forward, engineering models of void behavior and liquiod PCM free convection. Because of the accuracy of analytical models and the relative insensitivity of 1-g performance to test orientation, canister performance in micro-g should be predictable with a high degree of confidence by removing gravity effects from the analytical modeling.
Research Organization:
National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center
OSTI ID:
5437757
Report Number(s):
N-91-25174; NASA-TM--104427; E--6102; NAS--1.15:104427; CONF-910801--
Country of Publication:
United States
Language:
English