A borehole-to-surface electromagnetic survey
- Univ. of California, Berkeley, CA (United States)
- Lawrence Livermore National Lab., CA (United States)
We have assessed the feasibility of borehole to surface electromagnetic measurements for fluid injection monitoring. To do this we performed a vertical electromagnetic profiling (VEMP) experiment at the University of California Richmond Field Station where a saline water injection zone was created at a subsurface depth of 30 meters. The methodology used is quite similar to the conventional seismic (VSP) procedure for surface to borehole measurements. In our case however, the transmitter was located in a PVC cased borehole while the receivers were deployed on the surface. With a carefully designed system operating at 9.6 kHz we were able to make measurements accurate to 1 % in amplitude and 1 degree in phase. The data profiles at surface were centered on the injection well and extended for 60 m on either side of it. Measurements were made at 5 m intervals. Although the VEMP process is quite vulnerable to near surface conductivity anomalies we readily detected the flat tabular target zone which was about 3 m thick and covered an area of about 120 M{sup 2}.
- OSTI ID:
- 542849
- Report Number(s):
- CONF-951013-; TRN: 97:004463-0037
- Resource Relation:
- Conference: SEG `95: 65. annual meeting and international exposition of the Society of Exploration Geophysicists (SEG), Houston, TX (United States), 8-13 Oct 1995; Other Information: PBD: 1995; Related Information: Is Part Of SEG/Houston `95 - technical program; PB: 1623 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
In-situ borehole seismic monitoring of injected CO2 at the FrioSite
Vertical electromagnetic profiling (VEMP)