Experimental determination of the dynamic forces acting on non-rigid bodies
This method uses a sum of weighted acceleration signals to experimentally predict the external force which excites a mechanical system. The method is shown to yield excellent results in experiments conducted on a mass-loaded, free-free, steel beam. Random vibration was used to excite the beam in preliminary tests conducted to determine the optimal distribution of the weighting factors which can be associated with an equivalent mass at each accelerometer location. The system dynamic degrees of freedom (reflecting an upper frequency limit) are directly related to the number of independent acceleration measurements. Follow-on experiments demonstrate how the technique can be used to correctly predict an unknown force-time signature. Alternate techniques for determining the weighting factors are discussed. The technique does not appear to be overly sensitive to variations in the mass matrix.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (USA). Experimental Mechanics Dept.
- DOE Contract Number:
- AC04-76DP00789
- OSTI ID:
- 5402697
- Report Number(s):
- SAND-86-0491C; CONF-8610129-1; ON: DE86014726
- Country of Publication:
- United States
- Language:
- English
Similar Records
Strategic placement of accelerometers to measure forces by the sum of weighted accelerators
Strategic placement of accelerometers to measure forces by the sum of weighted accelerations